Model 66 "Egyptian Lotus" sewing machine waterslide decals

The decals are printed on clear waterslide decals for easy application to your machine.

All decals are reproduced from photographs taken of machines in our possession, or images obtained through extensive research on the internet.  A perfect reproduction or scaling of decals cannot be guaranteed due to the age of the original machines and when they were initially manufactured.

The decals are not printed using gold foil or metallic ink, however are printed to reflect a gold colour on a pantone colour scale.

It is our intention to get the decals as close to the original as possible, however it is important to note that we will not be responsible for any perceived differences between the original decals on your machine and the decals supplied, including colour variations and size differences.

HOW TO APPLY YOUR DECALS:
Step 1

• Cut out your decals
• Allow a minimum of 1mm border
• Tip... use straight lines and avoid sharp corners

Step 2

• Soak your decal in water for upto 30 seconds.
• Remove from the water before the decal falls off the paper
• Tip... Add a squirt of detergent to the water to assist with sliding

Step 3

• Place your decal upside down onto the machine (blue or white cardboard facing up).
• Gently slide the cardbord off the top of the decal.
• If you need to reposition the decal slide the decal into place (the detergent helps with this)
• Tip...  Don't hold the decal too firmly when sliding as it will stretch and distort the decal

Step 4

• After you have placed the decal, gently wipe away the excess water using gentle  strokes.
• Tip... use a micro fibre cloth to smooth the excess water from the decal, it is soft and will be less likely to stretch your decal
• Leave to dry for 30 minutes then apply your clear coat.
• Tip... we recommend using a 2pac automotive clear as your clear coat, applying multiple layers to ensure the machine and decals are protected.